Exam evaluation in prosthodontics across preclinical and clinical years from students' perspective: A cross-sectional study.

INTRODUCTION: The purpose of this study was to explore the students' perceptions and performance in prosthodontics theory exam. METHODS: A cross-sectional descriptive study was conducted on 560 (80.82%) students of different levels (third, fourth and fifth years) to explore their opinions and performance with regard to a number of issues on a prosthodontics theory exam (exam evaluation, exam preparation, exam material, exam timing). Demographic data were also collected. Descriptive statistics were generated and Chi-square test, independent sample t-test, ANOVA test and Pearson's correlation coefficient were used to examine the associations between different variables. The significance level was set at p < .05. RESULTS: Students' responses regarding exam evaluation was influenced by their gender, study level, high-school Grade Point Average (GPA) and undergraduate cumulative GPA. Perceived exam difficulty was significantly affected by gender (p = .03) and study level (p < .001), and negatively correlated to both high-school GPA (p < .001) and university GPA (p = .03). The vast majority (88.2%) depended on lecture hand-outs and lecture notes for study. Exam material and preparation were not significantly affected by any of the demographic variables with most respondents (76.8%) thinking that the lectures blended with prosthodontics laboratories/clinics would improve their understanding of the exam material. The suggested best time to conduct the exam was early afternoon (31.6%). Student performance was significantly affected by the study level (p < .001) and cumulative GPA (p < .001) with significant positive correlation between the high-school GPA and the mark in the exam (r = .29, p < .001) and by the amount of time students spent for exam preparation (p < .001). Those students who reported using textbooks to prepare for the exam got significantly higher marks (66.1 ± 8.7) compared to the students who did not (62.8 ± 9.7) (p = .03). CONCLUSIONS: Course level, GPA and gender were identified as the most influential factors in different aspects of exam evaluation and students' performance. Regular study and use of textbooks were demonstrated to improve academic performance. Additional orientation and guidance relating to the exam (especially for third year students) would be welcomed, as would alternate teaching methods such as small group discussions or study groups.

Setting the boundaries and scope of practice for the two sister specialities of dentistry: Operative dentistry-endodontics and prosthodontics.

Dental academia in Pakistan has recently achieved an important milestone. The name of Operative Dentistry speciality has been changed to Operative Dentistry & Endodontics (ODE). It was a much-needed change that was first felt about two decades ago. However, with the correction of name, there are certain challenges that this speciality has to manage now. These include improving the curriculum, setting up standards, and lastly, setting up its boundaries and scope of practice as some of its scope overlaps with a sister speciality called Prosthodontics. This overlapping of the boundaries of dental disciplines is a problem that is unique to Pakistan, India, and some East Asian countries where Operative Dentistry or Conservative Dentistry is combined with Endodontics. This paper aims to discuss the objective delineation of dental procedures and suggest a model of peaceful co-existence of sister dental specialities.

Self-assessment skills of undergraduate dental students in the preclinical course of complete removable prosthodontics at Tehran University of Medical Sciences.

INTRODUCTION: This study evaluated the self-assessment skills of third-year dental students regarding their performance in complete removable prosthodontics (CRP) preclinical course. METHODS AND MATERIALS: This cross-sectional study was conducted on all third-year dental students attending the International Dental College of Tehran University of Medical Sciences. The students were requested to self-assess their performance in primary impression making, custom tray fabrication, border moulding, final impression making, master cast fabrication, record-base fabrication and tooth arrangement in CRP preclinical course. The performance of dental students in each step was scored by themselves and their mentors. Data were analysed by the Mann-Whitney U, Pearson's correlation and t-tests (α = 0.05). RESULTS: Totally 25 male (55.6%) and 20 female (44.4%) dental students were evaluated. Significant differences were noted between male and female dental students in self-assessment scores regarding adequate extension of the custom tray (p = .027), the correct position of tray handle (p = .020), visibility of vestibular width and depth on the cast (p = .011), the coincidence of upper and lower midlines (p = .005) and correct orientation of maxillary and mandibular planes in the articulator (p = .036). The mean self-assessment score of female students was significantly higher than that of male students (p = .01). The scores given by the mentors were not significantly different for male and female students (p = .975). The difference between the self-assessment score of students and the mentor score was not significant (p = .067) either in males or in females (p > .05). CONCLUSION: Undergraduate dental students favourably self-assessed their performance in all steps of the preclinical course of CRP, comparable with their mentor assessment.

Modular training model for education of students in restorative and prosthodontic dentistry.

INTRODUCTION: At the moment, no commercial model solution is available for the individualisation of the dentition depending on the clinical case scenario. Furthermore, the realistic training of most restorative and prosthodontic procedures on a single dental study model is not possible. The aim of this study was the creation of a new training model to fill this gap. MATERIALS AND METHODS: Complete upper and lower jaw models were created based on existing scans and radiological data from a patient. All components for 100 complete models and 1128 teeth for the training were produced with a SLA-printer. Overall, 94 voluntary students attending the first and second preclinical course in prosthodontics tested the functionality of the model with three different tooth types against a standard dental study model and real teeth. After the training, the model was rated in a questionnaire. RESULTS: The production of the models and teeth was feasible. The overall rating of the different teeth was worse for type I (Ø 3.6 ± 1.1), significantly better for type II (Ø 2.5 ± 1.0) and type III (Ø 2.4 ± 1.0) than a standard typodont tooth (Ø 2.7 ± 1.1). The new model was rated significantly better overall (Ø 2.6 ± 1.0) than the standard training model (Ø 3.0 ± 1.1). CONCLUSIONS: The aim of this study was fulfilled. A superior training model was created with equivalent and better tooth types. The new teeth were outstanding in terms of cost-efficiency, appearance and feeling during preparation.

Computer-aided design software-enabled preclinical prosthodontic training: A digital education technique.

The prosthodontics preclinical training modules involve textbook-based two-dimensional (2D) ideal images and practicing on manikin models to emulate ideal tooth preparations and teeth arrangements. Relying solely on 2D images as objectives for preclinical exercises limits the trainee's creative skills to instructions of textbooks and clinical instructions received. With advancements in digital dentistry, dental trainees should have early exposure to the three-dimensional (3D) rendering of ideal preclinical objectives. A dental education technique using computer-aided design software and smartphones is described that will allow 3D rendering of ideal prosthodontic training assignments allowing early exposure to digital dentistry for dental training students.

A survey on utilization and barriers of digital removable prostheses in the US dental education.

PURPOSE: Gaining knowledge on the extent of digital technology implementation in dental education and the barriers to it will help inform future directions to promote the use of such technology and will enhance dental education. This study aimed to investigate the utilization of digitally fabricated removable prostheses and the potential obstacles to implementing such technology in US dental schools. METHODS: A survey was developed and distributed to the restorative dentistry department chairs and postdoctoral prosthodontic program directors. The survey delivery protocol included follow-up emails 1 week, 3 weeks, and 4 weeks after the initial email. The collected data were analyzed descriptively. RESULTS: The response rate was 85% and 45% for predoctoral and postdoctoral prosthodontic programs, respectively. The results showed that 88.06% of the predoctoral programs and 95.65% of the postdoctoral prosthodontic programs implement digital complete dentures in the curriculum; however, the digital removable partial dentures implementation rate was recorded at 70.77% in predoctoral programs and 61.9% in postdoctoral prosthodontic programs. CONCLUSIONS: Dental schools are challenged by cost, design software limitations, IT and laboratory support, and faculty training. Multifaceted support is instrumental in further implementing digital removable prosthodontics into dental education.

Implementation of mind mapping with problem-based learning in prosthodontics course for Chinese dental students.

BACKGROUND: The traditional Chinese dentistry classroom teaching model focuses on the instruction of knowledge details, but less on the frameworks and learners' motivation. Here, we introduced a combination of mind mapping and PBL instruction (MBL)into the prosthodontics course for Chinese dental students. This study aimed to evaluate the effectiveness and efficiency of MBL in prosthodontics and make observations from the students' perspectives, based on their response with the learning process. METHODS: We prospectively enrolled 56 fourth-year undergraduates of stomatology, and these participants were randomly allocated into either the combined mind map teaching group (MBL) or the problem-based learning group (PBL) to attend the prosthodontics course. An anonymous questionnaire was also administered to both groups to evaluate the students' perceptions and experiences, using closed and open-ended items. Data were analyzed using descriptive statistics and thematic analysis. RESULTS: The students' responses to closed items indicate their experience in PBL and MBL to be positive, including increased motivation, improved memory of knowledge, enhanced discipline connection and raised teamwork, with fairly higher ratings for the MBL group. However, the tutor-guided competence scores including the memory and framework part, were significantly higher for MBL group than PBL group (two-way ANOVA, p < 0.01, p < 0.001, respectively). Meanwhile, the self-perceived competence scores including the motivation, framework and teamwork part, were significantly higher for MBL group than PBL group (two-way ANOVA, p < 0.01, p < 0.001, p < 0.05, respectively). CONCLUSION: Our findings suggest that MBL teaching approach can help in integration of knowledge structure and enhance clinical reasoning. MBL is an effective and well-organized method in prosthodontics course for dental students.

Dental school quality assessment: Effect of student calibration on the outcomes of fixed prosthodontic cases.

BACKGROUND: Quality assurance (QA) of predoctoral dental student laboratory work is an essential part of the learning process that involves evaluating the student's ability, providing constructive feedback, helping develop the students' ability to self-assess, and promoting collegiality and communication among students, faculty, and laboratories. Faculty calibration, while often difficult to coordinate, is also necessary to providing consistent student feedback. AIM: The purpose of this study was to evaluate whether periodic calibration exercises with the fourth-year dental students and faculty impacted the number of student cases rejected during Quality Assurance evaluation of fixed prosthodontic cases submitted to The Dental College of Georgia laboratory tracking. CONCLUSION: Findings from this study provided evidence that ongoing calibration did result in a reduced number of incoming QA rejections in all periods reviewed except for one in which there was significant turnover among department faculty affecting QA calibration for that time period.

Overview and knowledge of prosthodontic diagnostic aids among interns and post graduates - A cross-sectional questionnaire study.

Aim: This study aims to evaluate and compare the knowledge of prosthodontic diagnostic aids among interns and postgraduates. Settings and Design: A questionnaire survey was conducted to assess and compare the knowledge of prosthodontic diagnostic aids among interns and postgraduates. Based on the pilot study with alpha error 5% and a power of study 80%, the sample size was estimated to be 858 for each group. Materials and Methods: The self constructed questionnaire consisted of 3 sections, of which each section had 5 questions, a total of 15 questions validated by a team of 6 experts. The questionnaire was distributed electronically among interns and postgraduates in various dental colleges across India. Data were collected and subjected to statistical analysis. Statistical Analysis: All outcomes of this survey were analyzed using an independent t test. The Mann- Whitney test was used to determine the significance of two groups. Results: From the results obtained, it was found that interns (mean: 6.90; standard deviation: 2.442) had less knowledge regarding diagnostic tools than postgraduate students (mean: 8.76; standard deviation: 1.818). Conclusion: Diagnostic aids simplifies the process of diagnosis and treatment planning. Moreover, the knowledge of diagnostic aids among younger generation permits them to redefine the way dentistry is practiced and at the same time helps to provide better treatment results and achieve the utmost for the profession. Adequate knowledge of diagnostic aids is the need of the hour. Dental professionals should constantly update knowledge regarding various diagnostic aids in Prosthodontics, so as to arrive at optimum diagnosis and treatment plan with longer prognosis.

Profile of prosthodontics program directors in North America.

PURPOSE: To develop a current profile of prosthodontics program directors (PPDs) in United States dental schools and describe the current challenges and responsibilities of those serving in the position and assess the professional needs of the program directors (PDs) to better support them in their roles. MATERIALS AND METHODS: A survey was sent to 51 participants who were identified as PPDs in North America via Qualtrics in 2019 to assess the professional needs of PDs to better support their roles. The survey consisted of 29 items organized into six sections: (1) demographic information; (2) hours and time spent in various areas of the job; (3) greatest challenges; (4) perceived importance of specific competencies; (5) opinions on the greatest rewards of the position; (6) their needs for support from the American College of Prosthodontists and advice for the future PD. RESULTS: The response rate for this survey was 88.3%. Of the 45 respondents, the majority were white/non-Hispanic, followed by Asian/Pacific Islanders. The two largest and equal numbers of participants who worked for more than 10 years and between 1 and 3 years were observed with approximately 29% each, and PDs who worked less than a year occupied the least amount. Overall, 34% of PDs are on the tenure track and 80% of those are tenured. Teaching and clinical services took away the greatest time with approximately 42% and 22.1%, respectively. Thirty-five (78%) PDs listed the greatest challenge they encountered was the workload of the role. Skills listed in leadership and personnel competencies were all rated more important than most of the skills listed in management. CONCLUSIONS: There is a wide gender gap and a lack of racial diversity among the PPDs. The biggest challenge faced by them is the amount of workload followed by budget and fiscal constraints. And for their improved efficiency, they gave emphasis on learning time management and continuous clinical training of newer advances.

Self-assessment and peer-assessment of the psychomotor skills in preclinical prosthodontics: A prospective study.

INTRODUCTION: Students' self-assessment and peer assessments are essential to understand the rubrics criteria and improve their psychomotor skills. The purpose of this study was to assess the impact of self-assessment score (SAS), peer-assessment score (PAS) and teacher assessment score (TAS) on the final scores of the psychomotor skills of dental students in a preclinical fixed prosthodontics course. MATERIALS AND METHODS: A prospective study included D2 students in a preclinical fixed prosthodontics course for two consecutive academic years from September 2017 to May 2019. Students' performance of various procedures over 14 sessions was assessed by SAS, PAS and TAS. Repeated-measures ANOVA was used to assess differences between the three scores and control charts showed their change over time. Multivariable linear regression was used to assess the association between two outcome variables: TAS and the total preclinical score and the explanatory variables: SAS, PAS, TAS, gender and GPA. The significance level was set at 5%. RESULTS: SAS had a significantly higher mean (80.21) than TAS (79.32) and PAS (78.58). SAS reached higher levels earlier than TAS and PAS. PAS had a stronger association with TAS than SAS (partial eta squared, η2 = 0.17 and 0.13), whereas SAS significantly predicted total preclinical score (p < .0001). CONCLUSIONS: PAS helped develop the skills of dental students during training, while SAS had an impact on their total preclinical score. Different student-centred activities are needed to support students' preclinical training in fixed prosthodontics courses.

Student perception and assessment outcomes using a pilot condensed format ("boot camp") in a Fixed Prosthodontics course.

INTRODUCTION: The purpose of this study was to assess student perception as well as course outcomes (final written examination grades) when using a pilot condensed format in an undergraduate Fixed Prosthodontics course, which was implemented as a response to the global pandemic of Covid-19. MATERIALS AND METHODS: The course was delivered in a condensed format, with a total of 28 direct contact hours in the Simulation Clinic within a 4 day period. Asynchronous remote learning was employed for the didactic portion of the course. Students completed surveys before and after the course, to assess their perception of the condensed format, and written examination grades were compared with previous years' grades. Data were entered in an Excel database (Microsoft Excel 2016) and analysed using a statistical analysis software program (IBM SPSS Statistics, v26; IBM Corp). The level of significance was set to α = 0.05. RESULTS: Overall, student perception of the condensed format was positive. At the beginning of the course, female students had less confidence in their skills compared to male students (p < .05). Written examination grades were significantly lower compared to previous years' grades (p = .04). CONCLUSION: The use of a condensed format can allow a course to be delivered in smaller student cohorts and provides the ability to reduce the total number of direct contact hours allotted to the course, creating space within the curriculum. Student perception of this format was generally positive. However, written examination scores were negatively impacted, indicating possible knowledge gaps resulting from the condensed course format. More studies are needed to assess the effect of the various curricular modifications that have been implemented due to the Covid-19 pandemic.

Influence of a major pre-clinical programme restructure on undergraduate student fixed prosthodontics clinical unit completions.

INTRODUCTION: Research is limited in measuring the effectiveness of pre-clinical programmes in preparing students for fixed prosthodontics clinical practice. The aim of this retrospectively study was to assess the influence of a major pre-clinical programme restructure on undergraduate student fixed prosthodontics clinical unit completions. MATERIALS AND METHODS: The fixed prosthodontics treatment registers from 2011 to 2020 were reviewed, and units completed per student (UCS) and units completed per student per session (UCSS) were calculated in the years before (2011-2013) and after (2014-2020) a major pre-clinical programme restructure (PR). Data were summarised in Microsoft Excel software (version 2016), and Student's t-test and paired t-tests were performed to determine the significance of difference in UCS and UCSS in the years before and after the PR. RESULTS: There was a significant difference in the UCS (p < .05) and UCSS (p < .01) in the years before and after the PR. The average UCS in the years before the PR was 2.20 units compared with 3.86 units after the PR, an increase of 75% per student. The average UCSS in the years before the PR was 0.15 units compared with 0.28 units after the PR, an increase of 87% per session. CONCLUSION: The fixed prosthodontics pre-clinical programme restructure resulted in statistically significantly increased student clinical unit completions.

A comparative evaluation of student experience with artificial teeth used in pre-clinical fixed prosthodontics post-core undergraduate teaching programs.

INTRODUCTION: Research is lacking in the use of artificial teeth for post-core techniques in undergraduate fixed prosthodontics pre-clinical education. The aim of this study was to compare the reasons for selection and explore the direct student experiences with artificial teeth used in two pre-clinical fixed prosthodontics post-core technique teaching programs conducted in consecutive years. MATERIALS AND METHODS: Fourth year undergraduate dental students who had completed the fixed prosthodontics pre-clinical program were invited to complete an anonymous online surveys. Information was requested on the use and direct student experiences with artificial and natural teeth for post-core techniques. Quantitative data was summarised and qualitative data was clustered into topics. The reasons for selection and use of artificial and natural teeth were compared within and between the two programs. RESULTS: 36% of 70 respondents in 2020 chose to use one or more artificial teeth for the post-core exercises in the pre-clinical program compared with 94% of 77 respondents in 2021 (p < .05). The use was driven by difficulty in sourcing appropriate natural teeth. Respondents reported "ease of use" as the dominant positive user experience with the main negatives being "unrealistic simulation of natural teeth" and "different surface texture/feel when cutting." CONCLUSION: Artificial teeth were reported to provide an appropriate and realistic simulation experience compared with extracted natural teeth and were easier to source. Students focussed on the practicalities of sourcing artificial teeth, associated costs and ease of use ahead of conceivable educational benefits. Cost limited the more widespread use of artificial teeth.

Fixed prosthodontics clinical unit completions in an undergraduate curriculum: A 10-year retrospective study.

INTRODUCTION: Providing undergraduate dental students with a range of clinical experiences in fixed prosthodontics procedures is an important component of dental education. The aim of this retrospective study was to analyse the types of laboratory-fabricated fixed prosthodontics clinical units completed by undergraduate students over 10 consecutive years and determine any significant trends. MATERIALS AND METHODS: The fixed prosthodontics treatment registers from 2012 to 2021 were reviewed and the different types of completed fixed prosthodontics units and total number of fixed prosthodontics units were recorded for each year. Completed units were categorised according to the type of restoration and expressed in whole numbers and as a percentage of the total number of units completed in each year. The data were presented in table and graph form. Mann-Kendall tests were performed to statistically analyse for trends in the different restoration types. RESULTS: Throughout all study years, porcelain bonded to metal (PBM) crowns (48.25%, range 35.70%-59.91%) were the most frequently completed fixed prosthodontics unit followed by full gold crowns (FGC) (20.84%, range 14.89%-27.30%) and all-ceramic crowns (ACC) (12.70%, range 3.67%-24.41%). Collectively, PBM, FGC and ACC comprised 81.80% of all completed fixed prosthodontics units. There were observed trends of increased use of all types of all-ceramic containing restorations, all types of all-gold containing restorations, all types of partial coverage restorations and specifically ceramic onlays and gold onlays. There were observed trends of reduced use of cast gold post-cores and all types of bridges. CONCLUSION: PBM crowns were the mainstay laboratory-fabricated fixed prosthodontic unit completed over 10 years of undergraduate student fixed prosthodontics clinical practice.

Introducing dental students to complete denture treatment in times of COVID-19: Students' responses.

OBJECTIVES: The COVID-19 pandemic required changes in the complete denture courses to comply with lock-in and social distancing requirements. The objectives were to assess (a) dental students' interest in a required complete denture course and the prosthodontics specialty, (b) how much time students spent on studying background, lab, and clinical content, and (c) how difficult and helpful course components were. Additionally, open-ended responses concerning what the students liked and what they wanted to have changed were analyzed as well. METHODS: After this "complete denture" course, 81 of 109 students responded to a web-based survey with questions about course content and design. This hybrid course consisted of weekly asynchronous virtual lectures, in-person simulated laboratory (sim lab) exercises, and synchronous virtual workshops. RESULTS: Exactly 53.7% were much/very much interested in this course, with nobody considering prosthodontics as their specialty. The students studied on average of 79.61 minutes for 1 hour (of background-related lecture, 69.92 minutes for a lab-based lecture, and 77.00 minutes for a clinical-content lecture (p < 0.001). They evaluated clinical content as most difficult, lab content as less difficult, and background material as least difficult (3-point scale with 1 = not at all difficult: means = 1.90/1.85/1.80; p < 0.001). They rated background lectures as least helpful, clinical material as more helpful, and lab content as most helpful (5-point scale with 1 = most helpful: means = 2.33/2.67/2.96; p < 0.001). Open-ended answers showed exceptionally positive responses for content and pedagogy of sim lab and clinical content. CONCLUSIONS: Gaining a better understanding of students' responses to hybrid "complete denture" courses is critical for optimally teaching this material in times of COVID-19.